Doorless Designs
Top-Off PatchPad
Top-Off PatchPad
Take your top off and get noticed.
Couldn't load pickup availability
Take the top off your Jeep and put that empty mounting point to work.
This compact patch holder turns one of your Jeep’s existing hardtop mounting holes into a tiny billboard for your favorite morale patch. Installation is quick and simple—just position the holder and secure it using your Jeep’s existing hardtop screw. No drilling, no permanent modifications, and no extra hardware to keep track of.
Add your favorite patch, change it whenever the mood strikes, and give your doors-off, top-off Jeep a little more personality.
Features:
- Uses an existing Jeep hardtop mounting hole
- Installs with your Jeep’s existing hardtop screw
- No drilling or permanent modification
- Neoprene base to avoid scratching paint
- Designed for standard hook-backed morale patches
- Easily swap patches whenever you want
- Made for top-off Jeep adventures
Less Jeep. More You.
Share
Additional Information
Materials
Built with materials selected for life outside the garage
Doorless Designs products are made from Polymaker™ ASA, a durable polymer chosen for its UV stability, weather resistance, and strong mechanical properties. Unlike materials commonly used for decorative 3D prints, ASA is well suited to functional parts that may be exposed to sunlight and changing weather conditions.
- UV stability for sun-exposed applications
- Better weather resistance than common ABS
- Water resistance
- Strong mechanical and thermal properties
- It's not going to warp when left inside your vehicle
- Matte finish that minimizes the appearance of print layers
- Minimal deformation under pressure
Each PatchPad features genuine VELCRO® Brand loop material with an acrylic pressure-sensitive adhesive. The soft loop surface is designed to accept the hook backing found on most morale patches, allowing patches to be changed whenever the mood—or the Jeep—calls for it.
Acrylic adhesive has better moisture, chemical, and temperature resistance than its general-purpose rubber adhesive
Our components are produced in layers using additive manufacturing. Minor variations and visible layer lines are normal characteristics of this process and make each part slightly unique.
Materials are selected for durability, but products should still be inspected periodically and removed if damaged or improperly secured. Color and appearance may change over time with prolonged environmental exposure.
Installation & Use
Clean the surface where the mount is going to be installed.
Install using the vehicle’s existing screw and tighten only until the mount is secure.
Do not overtighten.
Periodically inspect the mount and hardware, especially after extended driving or rough-road use, and retighten if necessary.
Discontinue use if the mount or hardware becomes damaged or cannot be secured properly.
Compatibility
| Jeep Generation | Thread Size | Factory Tool Head | Total Rear Bolts |
|---|---|---|---|
| JK Wrangler (2007–2018) | M8 x 1.25 | T40 Torx | 6 bolts |
| JL Wrangler (2018–Present) | M8 x 1.25 | T50 Torx | 6 bolts |
| JT Gladiator (2020–Present) | M8 x 1.25 | T50 Torx | 4 bolts |
The same size bolts are used throughout the Jeep generations so this mount will fit these models.
Product Disclosures
- Patch shown in product photos is for demonstration purposes and is not included unless specifically stated.
- Verify vehicle compatibility before ordering and installation.
- Always ensure the mount is properly seated and securely installed before operating the vehicle.
- Keep mounting and contact surfaces clean and free of dirt or debris to help prevent scratching or abrasion.
- Minor surface texture, layer lines, or cosmetic variations may occur as a normal result of the manufacturing process and do not affect product function.
- Doorless Designs LLC is not affiliated with, sponsored by, or endorsed by Jeep®, Stellantis, or any other vehicle manufacturer. Vehicle and trademark references are used only to describe product compatibility.